Budget DIY - Power Tools, Electrical Supplies, Plumbing, Lighting

 

Order by: Relevance, Product Rating
Price: Low to High, High to Low

 
Image of Trend 12 Assorted Fts Chisel Edge Guards
 

Trend 12 Assorted Fts Chisel Edge Guards

Chisel edge guards to protect from injury and damage. Sizes 1/4 inch, 1/2 inch, 3/4 inch, 1 inch, 1-1/4 inch and 1-1/2 inch. Two of each size. Pack of 12. Pack Qty: 12 pack...


 
Image of Trend 12 Piece 1/4 Shank Router Cutter Starter Set
 

Trend 12 Piece 1/4 Shank Router Cutter Starter Set

This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. Excellent value for money. Supplied in plastic carry case. Shank Diameter: 1/4 inch Shank Diameter: 1/4 Pack Qty: 12 pieceFeat...


 
Image of Trend 15 Piece 1/2 Shank Router Cutter Starter Set
 

Trend 15 Piece 1/2 Shank Router Cutter Starter Set

Fifteen piece cutter set, containing a range of popular cutters. Suitable for grooving, profiling and moulding. Use on softwoods, hardwoods, MDF and plywood. Supplied in a plastic carry case. Shank Diameter: 1/2 inch Bearing bore diameter: 4.76mm...


 
Image of Trend 16 Piece Snappy Hex Drill Bit Set
 

Trend 16 Piece Snappy Hex Drill Bit Set

Hex shank drill bit set in fabric tool holder for drilling wood, plastics and metals. Eight HSS fully ground TiN coated twist drill bits, sizes 2, 2.5, 3, 4, 5, 6, 7 and 8mm for wood, metal and plastic. Eight carbon steel dowel (Brad point) roll flut...


 
Image of Trend 16 Piece Snappy Tool Holder Empty
 

Trend 16 Piece Snappy Tool Holder Empty

Heavy duty fabric tool holder. With elastic pockets to hold Trend Snappy shanks. Removable inner section and removable elasticated cartridges. Tool holder has a belt loop and hanging loop/carry strap with quick release buckle. Front pocket with hook ...


 
Image of Trend 24 Piece 1/4 Shank Router Cutter Starter Set
 

Trend 24 Piece 1/4 Shank Router Cutter Starter Set

This twenty four piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/4-inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Supplied in plastic c...


 
Image of Trend 30 Piece 1/4 Shank Router Cutter Starter Set
 

Trend 30 Piece 1/4 Shank Router Cutter Starter Set

This thirty-piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/4-inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Set includes fifteen guide...


 
Image of Trend 30 Piece Snappy Tool Holder & Bit Set
 

Trend 30 Piece Snappy Tool Holder & Bit Set

Heavy duty fabric tool holder with a selection of assorted Trend Snappy tools. Standard Quick Chuck which is fitted into a standard 3/8-inch key or keyless chuck and allows Trend Snappy attachments or any direct drive 1/4-inch hex bits can then 'snap...


 
Image of Trend 30 Piece Snappy Tool Holder Empty
 

Trend 30 Piece Snappy Tool Holder Empty

Heavy duty fabric tool holder. With elastic pockets to hold Trend Snappy shanks. Supplied with a Trend Snappy pencil. Tool holders have a belt strap and are hook & loop fastening. Tool contents not included. Holding capacity: 30 pieces Size close...


 
Image of Trend 33/21X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2"
 

Trend 33/21X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2"

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be fitted a...


 
Image of Trend 33/22X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2"
 

Trend 33/22X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2"

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be fitted a...


 
Image of Trend 33/27X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2"
 

Trend 33/27X1/2 Threaded Arbor For M12 Bore Groover Blades 1/2"

A threaded arbor for use with a M12x1.0mm bore groover. OL: 76 mm Thread: M12 x 1.0 mm Spigot length incl thread: 35 mm Spigot thread length: 27 mm Shank Diameter: 1/2 inch Please note Does not come with spacers Shank Diameter: 1/2 Overall...



DIY products for home and trade with Budget DIY price comparison
Website www.budget-diy.co.uk ©2003-2019. All Rights Reserved. Privacy Policy.